Wayne PLS Series User Manual download pdf

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-

erty damage! Retain instructions for future reference.

Description

This pump is designed to sprinkle lawns

and small gardens from lakes, ponds, or

rivers, empty or fill stock tanks, remove

standing water from flooded areas,

transfer water or boost water pressure.

Flammable liquids such as gasoline,

chemicals or corrosive liquids should

never be used with this pump.

Safety Guidelines

This manual contains information that

is very important to know and under-

stand. This information is provided for

SAFETY and to PREVENT EQUIPMENT

PROBLEMS. To help recognize this

information, observe the following

symbols.

Danger indicates

an imminently haz-

ardous situation which, if not avoided,

will result in death or serious injury.

Warning indicates

a potentially haz-

ardous situation which, if not avoided,

could result in death or serious injury.

Caution indicates a

potentially haz-

ardous situation which, if not avoided,

may result in minor or moderate injury.

Notice indicates

important infor-

mation, that if not followed, may cause

damage to equipment.

General Safety Information

1. Read these rules and

instructions carefully.

Failure to follow these

instuctions could

cause serious bodily

injury and/or property damage.

Operating Instructions and Parts Manual PLS Series

This pump is non-

submersible. Keep

the motor dry at all times. Do not wash

the motor. Do not immerse. Protect the

motor from wet weather.

Do not allow any

part of cord or

receptacle ends to sit in water or in

damp locations.

Pump only clear water. Do

not pump flammable or

explosive fluids such as

gasoline, fuel oil,

kerosene, etc. Do not use in a flamma-

ble and/or explosive atmosphere.

Personal injury and/or property dam-

age could result.

This pump is not

designed to handle

salt water, brine, laundry discharge or

any other application which may con-

tain caustic chemicals and/or foreign

materials. Pump damage could occur if

used in these applications and will

void warranty.

All wiring must be per-

formed by a qualified

electrician. The pump

must be installed in com-

pliance with all local and national

codes.

2. Connect this product to a grounded

circuit equipped with a ground

fault circuit interruptor (GFCI)

device.

3. Before installing this product, have

the electrical circuit checked by an

electrician to ensure proper

grounding.

4. BE CERTAIN the pump

power source is dis-

connected before

installing or servicing

pump.

321602-001 1/06

5. Be sure the water source and piping

are clear of sand, dirt and scale.

Debris will clog pump and void war-

ranty.

6. Failure to protect pump and piping

from freezing could cause severe

damage and will void the warranty.

7. Do not run pump dry.

Installation

PUMPING FROM LAKES, PONDS OR

SMALL STREAMS

1. Locate pump as close as possible to

the water source, keeping the verti-

cal distance from the water to

pump as small as possible. Place

pump on level support. Protect

against flooding and excessive

moisture.

2. Long lengths of pipe or hose and

use of many fittings will reduce

pump flow. Use the smallest num-

ber of fittings and shortest possible

length of pipe or hose.

3. Be sure water is clear of debris such

as sand, mud, and gravel.

4. Connect inlet pipe or hose to pump.

The inlet connection is designed for

1" NPT thread. Rigid pipe such as

PVC will work fine for inlet and

outlet pipe. (Reminder: Minimize

length of pipe and number of fit-

tings.) An adapter for garden hose

is included (see Figure 1).

Figure 1

Pump Inlet

Pump Outlet

Portable Lawn

Sprinkler and

Utility Pump

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Utility Pump

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.Protect your

Page 2 - Maintenance

Lamanguerade entrada debe ser del tipo demanguera reforzada cuando se bombeade lagos, estanques o corrientespequeñas. Las mangueras de jardín nor-male

Page 3 - PLS Series

11 SpProblema Posible(s) Causa(s) Acción a TomarDiagnóstico de AveríasEl motor no funcionaEl motor se recalieentay el sistema de protec-ción lo apagaE

Page 4 - Limited Warranty

Para ordenar repuestos comuníquese con el distribuidormás cercano a su domicilioSírvase suministrarnos la siguienteinformación:-Número del modelo-Núme

Page 5 - Tourniquet

Use a grounded receptacle to reducethe risk of fatal electric shock.Never cut off the round groundingprong on the power cord. Cutting thecord or plug

Page 6 - Entretien

3Operating Instructions and Parts ManualSymptom Possible Cause(s) Corrective ActionTroubleshooting ChartMotor will not runMotor runs hot andoverload k

Page 7 - Série de PLS

4Operating Instructions and Parts Manual 1 Shaft Seal and Gasket 19041-001 12 Impeller 28091-001 13 Diffuser 28092-001 14 Nozzle Assembly 28093-001 15

Page 8 - Garantie Limitée

Page 9 - Regador portátil

des défaillances des joints. Remplir lapompe d'eau avant le démarrage.1. Retirer le port d'amorçage de lapompe et remplir d'eau. Réins

Page 10 - Mantenimiento

7 FrSérie de PLSGuide De DépannageManuel d’Utilisation et Pièces de RechangeLe moteur ne fonc-tionnera pas.Le moteur tourne àchaud et la surchargedéma

Page 11 - Serie PLS

1 Joint d'arbre et joint d'étanchéité statique 19041-001 12 Rotor 28091-001 13 Diffuseur 28092-001 14 Assemblage d'embout 28093-001 15

Page 12 - Garantía Limitada

Operating Instructions & Parts Manual XXXXX, XXXXX and XXXXXPlease read and save these instructions. Read carefully before attempting to assemble,